Filtered Mirroring allows certain packets to be selected for mirroring, rather than all packets ingressing or egressing a particular port.

TOI 4.20.1F EOS 4.28.0F

This features enables ARPs learnt on an SVI interface to be converted into Host routes which can further be

TOI 4.20.1F

Support for asset tagging aids hardware identification by the use of user supplied strings. Fixed

TOI 4.20.1F

This feature detects whether a given EOS image is MLAG ISSU compatible with the currently running version on a switch.

TOI EOS 4.15.2F 4.20.1F

BFD for static routes enables monitoring of directly connected next hop reachability using a BFD session. This is

TOI 4.20.1F

This document describes about RFC7130 on EOS. RFC7130 defines a mechanism to run BFD protocol on LAG with an

TOI EOS 4.18.0F 4.20.1F

The aggregate address advertise only feature adds the capability of NOT installing the Null0 route in the FIB/kernel

TOI 4.20.1F

BGP Monitoring Protocol (BMP) [1] allows a monitoring station to connect to a router and collect all of the BGP

TOI 4.20.1F

Nexthop Groups allow users to manually configure a set of nexthops by specifying their nexthop addresses and

TOI 4.20.1F

This feature adds support for a 'match route type' route map match clause in release 4.20.1F. This clause allows

TOI 4.20.1F

Bidirectional PIM has information on Bidirectional Protocol Independent Mulicast (PIM). Additional information

TOI 4.20.1F

Connectivity Fault Management (CFM) is used in Virtual Bridged Local Area Networks for detecting, isolating, and

TOI 4.20.1F

Config checkpoint mechanism provides a shortcut to copy the current running config into a file stored in checkpoint

TOI 4.20.1F

Connectivity Monitor is an EOS feature that allows users to monitor their network resources from their Arista

TOI 4.20.1F

DHCPv6 Prefix Delegation support enables a DHCP relay agent to program routes for addresses assigned by a DHCP server. The assigned prefixes could either be DHCPv6 IA_PD prefix delegation addresses, or DHCPv6 IA_NA global /128 addresses.

TOI 4.20.1F

This feature allows eAPI to run in multiple non default VRFs on the same physical router. In this way, users can

TOI 4.20.1F

EOS 4.20.1F introduces expanded VRRP, VARP and MLAG Peer Gateway virtual MAC capabilities on the 7500R, 7280R,

TOI 4.20.1F

Ethernet VPN (EVPN) is an extension of the BGP protocol introducing a new address family: L2VPN (address family

In the traditional data center design, inter subnet forwarding is provided by a centralised router, where traffic

TOI 4.20.1F

MPLSoGRE Filtered Mirroring is a specialized version of Mirroring to GRE Tunnel and Filtered Mirroring in which

Hardware Table Capacity Monitoring is a new feature to keep track of the capacity and utilization of various hardware

TOI EOS 4.15.2F 4.20.1F

Hierarchical Forwarding Equivalence Class (HFEC) changes a FEC from a single flat level to a multi level FEC

TOI 4.20.1F

The IPv6 Neighbor Discovery protocol performs Neighbor Unreachability Detection (NUD) in order to determine if two

TOI 4.20.1F

IPv6 Router Advertisement Consistency Logging, when enabled, allows for notification through syslogging of

TOI 4.20.1F

IS IS Graceful Restart adds support for Restart Signaling for IS IS, IETF RFC 5306. When IS IS is used

TOI 4.20.1F

This feature is available when configuring BGP in the multi agent routing protocol model. Ethernet

TOI 4.20.1F

L3 interface ingress counters can be used to count routable traffic coming into the box on sub interfaces and vlan

TOI 4.17.0F 4.20.1F

LANZ on 7160S 32CQ, 7160 48YC6 and 7160 48TC6 adds support for monitoring congestion on front panel ports with Start,

TOI 4.20.1F

The LDP pseudowire feature provides support for emulating Ethernet connections over a Multiprotocol Label

TOI 4.17.1F 4.20.1F

Link Fault Signalling (LFS) is a mechanism by which remote link faults are asserted over a link experiencing

TOI 4.20.1F

Classification of MPLS packets based on traffic class bits in MPLS header for QoS Policy Maps. DCS

TOI 4.20.1F

The feature MP BGP Multicast provides a way to populate the MRIB (Multicast Routing Information Base). MRIB is an

TOI 4.20.1F

EOS 4.15.0F adds support for MPLS encapsulation of IP packets in EOS. The functionality is exposed through two

EOS 4.15.0F TOI 4.20.1F

Multi hop BFD  allows for liveness detection between systems whose path may consist of multiple hops. With an

TOI 4.20.1F

Multicast Only Fast Reroute (MoFRR) is a feature based on PIM sparse mode (PIM SM) protocol to minimize packet loss in a

TOI 4.20.1F

 . These are the release notes and configuration guide for the OpenConfig feature available in the 4.20.1F EOS

TOI 4.20.1F

EOS release 4.20.1F adds OSPFv3 flood pacing support that allows configuring the minimum interval between the

TOI 4.20.1F

Introduction. PIM Static Source Discovery (PIM SM SSD) is a feature implemented as part of PIM SM. Familiarity with

TOI 4.20.1F

Traffic is managed through policy maps that apply data shaping methods to specific data streams. A policy map is a data

TOI 4.20.1F

Equal Cost Multi path (ECMP) provides the ability to load share traffic across multiple next hops.

TOI 4.20.1F

The BGP labeled unicast (LU) RFC is used to advertise BGP routes with a stack of MPLS labels, thereby allowing

TOI 4.17.0F 4.20.1F

Multi Agent, Platform independent. This feature supports RFC 7606, which  provides improved security and

TOI 4.20.1F

Hardware Table Capacity Monitoring is an existing feature to keep track of the capacity and utilization of various

This article describes the Tap Aggregation Traffic Steering on MPLS Labels feature. The purpose of this feature is to

TOI 4.20.1F

This document describes the truncation capability for Tap Aggregation, which allows tapped traffic to be truncated to a smaller size before being transmitted.

This article describes the TAP Aggregation User Defined Fields feature. The purpose of the User Defined

The BGP labeled unicast (LU) RFC is used to advertise BGP routes with a stack of MPLS labels, thereby allowing

TOI 4.20.1F

Unidirectional links is a feature that configures an Ethernet interface transmit and receive paths to be

This feature adds the capability to import as path access list from a URL, in release 4.20.1F.  The file

TOI 4.20.1F