- Written by Srinivasan Koona Lokabiraman
- Posted on June 3, 2020
- Updated on June 3, 2020
- 5979 Views
It is often useful to know on a per AFI/SAFI basis, the number of paths that have been selected from a peer as best paths.
- Written by Sameer Shah
- Posted on March 3, 2023
- Updated on March 16, 2023
- 3620 Views
This feature provides a mechanism to mark specific routes as resilient ECMP (RECMP) eligible using BGP RCF policies. A policy based mechanism provides a lot of flexibility in choosing the RECMP eligible routes using criteria such as:
- Written by Andrew Tran
- Posted on June 20, 2022
- Updated on June 29, 2022
- 4744 Views
Routes covered by a resilient equal-cost multi-path (RECMP) prefix are types of routes that make use of hardware tables dedicated for equal-cost multi-path (ECMP) routing.
- Written by Johnny Chen
- Posted on June 24, 2021
- Updated on August 7, 2023
- 8509 Views
ECMP Hash visibility CLI determines the output interface for an ECMP set based on the flow parameters supplied by the user. Ingress interface, source IP address, destination IP address and IP protocol are the required parameters.
- Written by Lavanya Conjeevaram
- Posted on June 29, 2016
- Updated on April 22, 2024
- 7410 Views
ECMP Hash visibility CLI determines the output interface for an ECMP set based on the flow parameters supplied by the user. Ingress interface, source IP address, destination IP address and IP protocol are the required parameters. L4 source and destination ports and VLAN identifier are optional, but should be specified if the packet has them.
- Written by Konrad Ciekot
- Posted on October 24, 2019
- Updated on October 24, 2019
- 7287 Views
As of 4.22.1F Load Balance Profiles can be used to explicitly configure ECMP Load Balance parameters. In addition,
- Written by Binglai Niu
- Posted on April 24, 2020
- Updated on February 15, 2024
- 5503 Views
On network devices, when a route is programmed, a certain portion of hardware resources is allocated and associated
- Written by Pedro Coutinho
- Posted on June 4, 2020
- Updated on June 4, 2020
- 5008 Views
EOS version 4.24.1F introduces support for specifying multiple vias to form ECMP in MPLS static tunnels. A new
- Written by Ryan Halbrook
- Posted on June 28, 2021
- Updated on June 28, 2021
- 6283 Views
Multipath color is a new multicast multipath mode for controlling PIM RPF selection. In the default multipath
- Written by Emil Maric
- Posted on February 16, 2021
- Updated on February 16, 2021
- 5618 Views
Routes covered by a resilient equal cost multi path (RECMP) prefix are types of routes that make use of hardware tables
- Written by Diksha Mahajan
- Posted on August 31, 2023
- Updated on September 1, 2023
- 2531 Views
This feature adds support for source interface based load-balancing with Dynamic Load-Balancing ( DLB ) and Hash based Load-Balancing on Equal Cost Multi Path ( ECMP ) groups
- Written by Nikhil Goyal
- Posted on August 20, 2020
- Updated on August 20, 2020
- 4124 Views
This feature adds the support for learning multiple equal cost routes for a destination in the RIP protocol. This
- Written by Binglai Niu
- Posted on October 21, 2021
- Updated on October 21, 2021
- 5178 Views
Nexthop groups is a routing mechanism where users can configure a set of nexthops by specifying their nexthop
- Written by Sandeep Betha
- Posted on April 21, 2020
- Updated on April 27, 2020
- 5602 Views
In the ribd routing protocol model, the “maximum paths … ecmp …” command allows restricting the number of BGP