Configure a Group

Once the group is created successfully, you can configure it. You can configure a group in two ways. Firstly, you can switch on an available SSID for the group. This will apply the configuration of the SSID to the group. Or, if you do not wish to switch on the SSID, then you can simply configure and save the Device and Radio Settings to apply these settings to the group.

Apply configuration to a Group by Switching on the SSID


To configure a group by switching on the SSID:
  1. Navigate to CONFIGURE > WiFI > SSID.
  2. Click on the hamburger icon (three horizontal lines) on the top left corner of the page.
  3. Expand the list of groups, available at the bottom of the location pane.
  4. Select the group to which you would like to apply the configuration. Info:On selecting the group the list of SSIDs on the right hand side panel is refreshed.
  5. Turn ON the desired SSID from the list of SSIDs.

Copy Configuration from a Folder or Group

This option allows you to copy Wi-Fi configuration settings from a folder/group to an another folder/group.

To copy the settings to a different location or group, perform the following steps:
  1. Go to CONFIGURE > WiFi.
  2. Select the location where you want to copy the Wi-Fi settings and click Get Configuration from the more menu.
  3. Under the Select Folder tab, select the location whose settings you want to copy.
  4. Click Apply Configuration.
  5. Click Continue in the pop-up dialog to copy the Wi-Fi configuration to the selected location.
Similarly, you can copy the settings of a group at a location to an another group at a different location using Groups Navigator.