BGP sFlow export is to add BGP route information in sFlow sample packet is the destination IP matches a BGP route. Prior

Unequal Cost Multi Path (UCMP) for BGP is a mechanism for forwarding traffic from a device for an ECMP route in the ratio

Bidirectional Protocol Independent Multicast (PIM) allows routers to build trees to deliver multicast traffic

Bidirectional PIM has information on Bidirectional Protocol Independent Mulicast (PIM). Additional information

TOI 4.20.1F

"Block Untagged Frames on Dot1Q Tunnel port" is a new feature that has been added in this release. When this feature is

TOI

With the 12.0 release, CV-CUE supports Bluetooth scanning to detect nearby Bluetooth devices.  

Bug Alerts is a service that runs on Arista CloudVisionTM eXchange (CVX) that provides customers with information on

This is an addition to the SSL certificate and key management feature added in EOS 4.15.0F.

Connectivity Fault Management (CFM) is used in Virtual Bridged Local Area Networks for detecting, isolating, and

TOI 4.20.1F

 With the 12.0 release, CloudVision Cognitive Unified Edge (CV-CUE) introduces Channel Maps. This chart displays the number of clients and access points (APs) visible to the managed device at a time on a given channel.

With the 12.0 release, you can view the criteria and parameters that influenced a channel change event. The data provides you insights on why the access point (AP) selected a particular channel over another.

Support of DSCP + ECN filter in ACL rules for QoS policy ma. Packet classification is supported on basis

TOI Chicago

This feature provides the ability to track the reason why a BGP path is excluded from the BGP best path selection

BGP TOI 4.17.0F

In order to use the BST(Binary Search Tree) resources more efficiently for multicast, we are introducing a new CLI

With the 13.0 release, CloudVision Cognitive Unified Edge (CV-CUE) introduces the Client Explorer view. It helps you view the distribution of clients that are connected to Arista devices. 

Cloud HA feature provides active active redundancy between two vEOS router instances running in Cloud such as AWS and

TOI 4.20.6F

The 7500R 8CFPX LC linecard with ACO CFP2 optics provides connectivity over DWDM systems and links. 7500R 8CFPX LC

Command API's authentication can now be accomplished via X.509 public key certificates. Public key

Command API requests for "show" commands return structured outputs which are based on some internal models in EOS. In

Config checkpoint mechanism provides a shortcut to copy the current running config into a file stored in checkpoint

TOI 4.20.1F

The Commit Timer mechanism provides a way to automatically rollback changes done by a config session, unless

In EOS 4.15.0F release, we have introduced the configuration sessions feature. Configuration sessions allow the

Under config router bgp mode, the following is the format for configuring remote port for a peer or peer grou

An IPv6 link local address for an interface is generated automatically using the modified EUI 64 scheme. All IPv6

Configurable TPID enables TPID to be configured per switchport (default TPID on switchport is 0x8100) on

Connectivity Monitor is an EOS feature that allows users to monitor their network resources from their Arista

TOI 4.20.1F

This feature is an extension to the Explicit Congestion Notification (ECN) functionality for non ECN Capable

With the 12.0 release, CloudVision Cognitive Unified Edge (CV-CUE) introduces the capability to copy policies from one Wireless Manager server and reuse it in another server.

CVX High Availability (HA) provides CVX Controller redundancy by having multiple CVX controllers running in a

This feature adds support for securing out of band connection between CVX server and CVX clients by SSL/TLS

This feature allows adding third party VTEPs to  a common L2 domain comprising of Arista and non Arista switches

ACL based QoS marking and policing is supported on DCS 7160 switches. Currently we support IPv4 ACL based QoS via

Stream Control Transmission Protocol (132) is a transport layer protocol, much like TCP. After the IP header, a

Delay based ECN on DCS 7280SE and DCS 7500E adds support for measuring the queueing delay that an IPv4 unicast routed

CloudVision Portal release 2017.2.0 introduces support for the network wide Telemetry framework consisting of the

With the 12.0 release, you can configure DHCP fingerprinting to allow or deny clients getting connected to an SSID. Using DHCP fingerprinting, you can identify the operating system (OS) of the client based on the DHCP exchange packets between the client and the DHCP server. 

Dynamic Host Configuration Protocol (DHCP) is a feature which can be used to provide an IP address to the interfaces on

The EOS DHCP relay agent now supports forwarding of DHCP requests to DHCP servers located in a different VRF to the DHCP

DHCPv6 Prefix Delegation support enables a DHCP relay agent to program routes for addresses assigned by a DHCP server. The assigned prefixes could either be DHCPv6 IA_PD prefix delegation addresses, or DHCPv6 IA_NA global /128 addresses.

TOI 4.20.1F

Directed broadcast is method of transfer to send a packet to recipients in a target subnet. This is done by sending a

DirectFlow runs alongside the existing layer 2/3 forwarding plane, enabling a network architecture that

The following new enhancements to DirectFlow and/or OpenFlow are added in EOS 4.15.0F:. DirectFlow

IEEE802.1D 2004, Section 7.12.6 specifies destination MAC addresses that are normally trapped (not forwarded) by

With this feature, user can fetch various internal hardware drops info from each switch and isolate the switch or

DCS 7280E. Arad QOS MAP:. This command assigns the DSCP rewrite value of 37 to traffic classes 2, 4, and 6.

Dual Tag VLAN mapping feature defines mapping between (outer VID and inner VID of double tagged packet) and bridging

TOI 4.17.0F

Starting with EOS4.15.0F, dynamic and symmetric LAG hashing policies are supported on the 7500E platform. Dynamic

Dynamic resizing of nexthop groups, as the name suggests, is a feature that enables a nexthop group to dynamically

This feature allows eAPI to run in multiple non default VRFs on the same physical router. In this way, users can

TOI 4.20.1F

ECMP Hash visibility CLI determines the output interface for an ECMP set based on the flow parameters supplied by the